Tag Archives: particulate matter

Residential Radon Gas Testing – Mold and Indoor Air Quality Inspection by ScanTech Technical Consulting

Radon is one of the leading causes of lung cancer

Radon is one of the leading causes of lung cancer in the United States

In a rush to test your home for radon gas or radioactivity in natural stone such as granite or marble? Did you know that radon is the 2nd leading cause of lung cancer? (Smoking is 1st and radon gas synergistically increases mortality rates for smokers)

While it is not well known, radon gas levels EXCEED EPA action limits of 4 picoCuries/liter (pCi/L) in up to 10 % of all homes in Dallas county with an additional 14 % falling into the marginal range of 2 – 4 pCi/L. This means that 1 out of 4 homes (10 % + 14 % = 24%) in Dallas either have a radon issue or fall into a caution category. Other counties, such as Tarrant, Collin and Denton are not immune either. (see the link below on Radon FAQ from ScanTech for more details)

Example areas of the Metroplex (not a complete or comprehensive list) which have been found by ScanTech testing to have excess radon levels which are statistically higher than the 24 % quoted above include:

  • North Dallas and Far North Dallas
  • Lake Highlands
  • University Park
  • Highland Park
  • Park Cities area
  • Richardson
  • Arlington

ScanTech now has the capability to test and get results within as little as 24 hours of initial deployment using a high quality digital tester in case your option period is about to expire.

Our services are both faster and cheaper than competing methods or companies and we have been performing radon testing for homeowners in the DFW area for over 10 years.

Testing is performed by an engineering graduate experienced in radioactivity measurements,  indoor air quality testing including mold inspection, formaldehyde and radon gas testing.

AARST NRPP National Radon Testing Professional Certified

AARST-NRPP Nationally Certified Radon Residential Measurement Provider ID # 108991 RT*

*Meets HUD, Fannie Mae, Freddie Mac and GSA requirements

Mold Assessment Consultant – Texas Dept. of Health Service License # MAC1387

(Activated charcoal short term radon test kits are accurate as well, but typically require at least 4 business days to get results under best case conditions and a complete kit deployment and pickup service is almost always more expensive due to the additional travel)

Call / text to 214.912.4691 – please include physical address, square footage property and email

More information is available here:

RADON FAQ Dallas /Fort Worth — DFW North Texas Area

http://www.indoorairqualitytestingdallas.com/

http://www.scantech7.com/formaldehyde-indoor-air-quality-testing-services-dallas-fort-worth/

Radon Deaths United States Annually

Annual Radon Deaths Updated Chart

Cities for radon / air quality inspection services include: Dallas, Austin, Houston, San Antonio, Spring, The Woodlands, Round Rock, Plano, Highland Park, University Park, Park Cities, Arlington, Fort Worth, Grapevine, Frisco, Denton, McKinney, Allen, Lewisville, Irving, Mesquite, Bedford, Euless, Richardson, Coppell, Grand Prairie, Garland, Addison, Farmers Branch, Rockwall, Carrollton, Parker, Rowlett, Lucas, Fairview, Park Cities, Keller, Roanoke, The Colony, Highland Village, Lake Dallas, Corinth, Prosper, Duncanville, Lancaster, Rowlett, Royse City, Trophy Club, Southlake and Hurst. Counties served include Dallas, Collin, Denton, Tarrant and Rockwall County.

 

Indoor Air Quality (IAQ) Testing Services (including chemicals / carcinogens like Formaldehyde) Available – Fast Onsite Results!

Formaldehyde NFPA Diamond from MSDS (Material Safety Data Sheet)

Formaldehyde NFPA Diamond from MSDS (Material Safety Data Sheet)

ScanTech Technical Consulting performs indoor air quality tests including particulate matter in the air (residential and commercial) in the 0.5 – 2.5 micron and 2.5 micron + range  (PM 2.5 and PM10) in order to evaluate how clean your air is with respect to dust and other fine particles. We also offer formaldehyde and VOC levels testing due to chemicals used in the manufacture of pressed wood flooring, lumber, laminates, glues and other adhesives in your home and factory/office.

More information on formaldehyde can be found here:

http://emfsurveydallas.com/formaldehyde-indoor-air-pollutant-and-testing/

We can also test for VOCs, (Volatile Organic Compounds) CO2 (Carbon Dioxide) levels and O2 oxygen levels in your home to check ventilation quality. Datalogging over time available to show trends and measure the effects of HEPA filtration and electrostatic air ionization units.

Our background in organic and environmental chemistry, epidemiology, advanced microbiology, medical geology  and human physiology makes us uniquely qualified to answer your concerns regarding the invisible environment you breathe every day.

July 2016 ruling by the EPA on the emissions of formaldehyde of wood products produced or imported into the United States:

https://www.epa.gov/formaldehyde/formaldehyde-emission-standards-composite-wood-products-0#additional-resources

The following tables and information are from:

Health Effects Notebook for Hazardous Air Pollutants

To convert concentrations in air (at 25°C) from ppm to mg/m3: mg/m3 = (ppm) × (molecular weight of the compound)/(24.45) For formaldehyde which is CH20: 1 ppm = 1.23 mg/m3.

Explanation of Formaldehyde Levels

Formaldehyde Regulatory and Health Levels Comparison

Formaldehyde Regulatory & Health Levels Comparison

AIHA ERPG–American Industrial Hygiene Association’s emergency response planning guidelines. ERPG 1 is the maximum airborne concentration below which it is believed nearly all individuals could be exposed up to one hour without experiencing other than mild transient adverse health effects or perceiving a clearly defined objectionable odor; ERPG 2 is the maximum airborne concentration below which it is believed nearly all individuals could be exposed up to one hour without experiencing or developing irreversible or other serious health effects that could impair their abilities to take protective action.

ACGIH STEL–American Conference of Governmental and Industrial Hygienists’ short-term exposure limit expressed as a time-weighted average exposure; the concentration of a substance which should not be exceeded at any time during a workday.

LC50 (Lethal Concentration50)–A calculated concentration of a chemical in air to which exposure for a specific length of time is expected to cause death in 50% of a defined experimental animal population.

NIOSH IDLH–National Institute of Occupational Safety and Health’s immediately dangerous to life or health limit; NIOSH recommended exposure limit to ensure that a worker can escape from an exposure condition that is likely to cause death or immediate or delayed permanent adverse health effects or prevent escape from the environment.

NIOSH REL–NIOSH’s recommended exposure limit; NIOSH recommended exposure limit for an 8- or 10-h time-weighted average exposure and/or ceiling.

OSHA PEL–Occupational Safety and Health Administration’s permissible exposure limit expressed as a time-weighted average; the concentration of a substance to which most workers can be exposed without adverse effect averaged over a normal 8-h workday or a 40-h workweek.

 

Composition of Dust Particles and Particulate Matter in The Air

When I test for PM2.5 and PM10 which are Fine Particle and Coarse Particle designations used by the EPA, I am often asked what is the nature of this particulate matter. These may also be referred to as TSP (Total Suspended Particulate) or RSP (Respirable Suspended Particulate) matter. While it is very difficult to tell exactly what it is without microscopic analysis and will vary depending on the environment, an educated guess can be made based on what sources are nearby and the potential contribution of those sources based on typical size regimes.

Possible sources are pollen, toxic mold spores, smoke, bacteria, pet dander, construction dust, etc.

There are some useful reference charts that not only talk about the ranges of certain pollutants, but also give an indication of different filtration mediums which are relatively effective in removing these contaminants.

 

Particulate Matter in Air Quality

Air Filtration with Regard to Particle Size

*NOTE – HEPA (High Efficiency Particulate Air) filters are typically rated at 99.97% efficiency for particles of 0.3 um or larger. At this time, I am not sure that a HEPA filter will remove more than 95% of particles which are 0.01 microns in size as this chart seems to imply.

Also, beware of filters and vacuum cleaners which claim to be “HEPA-like”, “HEPA-type” or “99% HEPA” as these are not true HEPA filters and are often inferior in quality with regard to air filtration efficiency.

BTW – the term DS efficiency mentioned in the Pleated Filter (40% DS ) refers to Atmospheric Dust Spot Efficiency which measures how well a filter removes staining dust from the air.

 

HEPA Air Filtration Particle Ranges

HEPA Filtration Particle Chart

 

Particle Filtration Size Chart HEPA vs. ULPA

Particle Filtration Size Chart HEPA vs. ULPA

 

Characteristics of Particles and Particle Dispersoids

Characteristics of Particles and Particle Dispersoids

This is a fairly technical diagram for general reference use.

 

Origin of Dust Particulate Matter

Origin of Dust Particulate Matter